manualshive.com logo in svg

Asus P9A-I Series, User Manual, Page: 46 / 136

Share
Download
Asus P9A-I Series User Manual Download Page 46

4-4

Chapter 4: BIOS setup

3. 

Press <Tab> to switch to the 

Drive

 field.

4. 

Press the Up/Down arrow keys to find the USB flash disk that contains the latest BIOS 

then press <Enter>. 

5. 

Press <Tab> to switch to the 

Folder Info

 field.

6. 

Press the Up/Down arrow keys to find the BIOS file then press <Enter>. 

7. 

Reboot the system when the update process is done.

4.1.2 

ASUS EzFlash Utility

The ASUS EzFlash Utility feature allows you to update the BIOS using a USB flash disk 

without having to use a DOS-based utility.

ASUS Tek. EzFlash Utility

[Up/Down/Left/Right]:Switch [Enter]:Choose [q]:Exit

FS0

System Volume Information 

<DIR> 

P9A-I Bios 

<DIR> 

Windows <DIR>

P9A-I Bios

<DIR>

     Current Platform

Platform : P9A-I

Version :  0201

Build Date :04/10/2014

     New Platform

Platform : P9A-I

Version :  0202

Build Date :04/15/2014

The succeeding BIOS screens are for reference only. The actual BIOS screen displays 

may not be the same as shown.

To update the BIOS using EzFlash Utility:

1. 

Insert the USB flash disk that contains the latest BIOS file to the USB port.

2. 

Enter the BIOS setup program. Go to the 

Tool

 menu to select 

ASUS

 

EzFlash Utility

 

and press <Enter> to enable it.

Download the latest BIOS from the ASUS website at www.asus.com before using this 

utility.

Summary of Contents for P9A-I Series









































































































































Reviews:

No comments