manualshive.com logo in svg

Asus P9A-I Series, User Manual, Page: 125 / 136

Share
Download
Asus P9A-I Series User Manual Download Page 125

ASUS P9A-I Series

5-19

    

    

5.5 

Installing the Intel

®

 I354 Gigabit Adapters driver

This section provides the instructions on how to install the 

Intel

®

 I354 Gigabit Adapters

 

sdriver on the system.
To install the 

Intel

®

 I354 Gigabit Adapters

 driver on Windows

®

 Server 2008 R2:

1. 

Restart the computer.

2.   Log on with 

Administrator

 privileges.

3. 

Insert the motherboard/system support DVD to the optical drive.

If Autorun is NOT enabled in your computer, browse the contents of the support DVD to 

locate the file 

ASSETUP.EXE

 from the 

Bin

 folder. Double-click the 

ASSETUP.EXE

 to run 

the support DVD.

4. Click 

Intel I354 Gigabit Adapters Driver

 

in the 

Drivers

 tab of the main screen to 

start the installation.

5. Click 

Next 

to continue. 

6. 

From the 

Program Maintenance

 window, 

select 

Modify 

then click 

Next.

Summary of Contents for P9A-I Series









































































































































Reviews:

No comments