Asus P8Q77-M User Manual Download Page 36

Page: 36 / 78

ASUS P8Q77-M

1-26

Intel

Q77 Serial ATA 6.0Gb/s connectors (7-pin SATA6G_1/2 [gray])

These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0

Gb/s signal cables.

• These connectors are set to [AHCI] by default. If you intend to create a Serial ATA RAID

set using these connectors, set the

SATA Mode Selection

item in the BIOS to [RAID].

See section

2.5.5 SATA Configuration

for details.

• Before creating a RAID set, refer to the RAID Supplementary Guide included in the

folder named Manual in the support DVD.

• You must install Windows

XP Service Pack 3 or later version before using Serial ATA

hard disk drives. The Serial ATA RAID feature (RAID 0, 1, 5, and 10) is available only if

you are using Windows

XP SP3 or later version.

• When using hot-plug and NCQ, set the

SATA Mode

Selection

item in the BIOS to

[AHCI]. See section

2.5.4 SATA Configuration

for details.

SATA6G_2

TA_R

SATA

_TX

SATA_T

SATA6G_1

SATA

SATA_R

TA_T

P8Q77-M

P8Q77-M Intel

SATA 6.0Gb/s connectors

Summary of Contents for P8Q77-M















































































Search results

Summary of Contents for P8Q77-M

Reviews:

Related manuals for P8Q77-M

Brands by name

Popular brands

Asus P8Q77-M, User Manual

Search results

Summary of Contents for P8Q77-M

Reviews:

Related manuals for P8Q77-M

Brands by name

Popular brands