manualshive.com logo in svg

Asus P8P67 LX, User Manual

Share
Download
Asus P8P67 LX User Manual Download Page 75

ASUS P8P67 REV 3.1

3-9

Chapter 3

Changing the values in this menu may cause the system to become unstable! If this 

happens, revert to the default settings.

CPU Power Management

The sub-items in this menu allow you to set the CPU ratio and features.

CPU Ratio [Auto]

Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use 

<+> and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU 

model.
Enhanced Intel SpeedStep Technology [Enabled]

Allows you to enable or disable the Enhanced Intel

®

 SpeedStep Technology (EIST).

[Disabled]  The CPU runs at its default speed.
[Enabled]  The operating system controls the CPU speed.
Turbo Mode [Enabled]

This item appears only when you set the 

Enhanced Intel SpeedStep Technology

 

item to [Enabled] and allows you to enable or disable the Intel

®

 Turbo Mode 

Technology.
[Enabled]  Allows processor cores to run faster than marked frequency in specific 

condition.

[Disabled]  Disables this function.

The following three items appear only when you set the 

Enhanced Intel SpeedStep 

Technology

 and 

Turbo Mode

 items to [Enabled].

Turbo Ratio [Auto]

Allows you to manually adjust the Trubo CPU ratio.
[Auto] 

 

 

 

 All Turbo ratio are set by Intel CPU default 

settings

[By ALL Cores (Can Adjust in OS)] 

 All numbers of active cores will be set to one 

single Turbo ratio in OS

[By Per Core (Cannot Adjust in OS)] 

 All numbers of active cores can be set to an 

individual Turbo ratio in BIOS.

Maximum Turbo Ratio setting in OS [Auto]

This item appears only when you set the 

Turbo Ratio

 item to [By ALL Cores (Can 

Adjust in OS)]. Use the <+> and <-> keys to adjust the value.
1-/2-/3-/4-Core Ratio Limit

This item appears only when you set the 

Turbo Ratio

 item to [By Per Core (Cannot 

Adjust in OS)]. Use the <+> and <-> keys to adjust the value.
Long Duration Power Limit [Auto]

Use the <+> and <-> keys to adjust the value.

Summary of Contents for P8P67 LX









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands