Asus P8H67-V REV 3.0 User Manual Download Page 86

Page: 86 / 136

3-20

Chapter 3: BIOS setup

Chapter 3

SPDIF Out Type [SPDIF]

[SPDIF]

Sets to [SPDIF] for SPDIF audio output.

[HDMI]

Sets to [HDMI] for HDMI audio output.

Renesas Electronics USB 3.0 [Enabled]

[Enabled]

Enables the USB 3.0 controller.

[Disabled]

Disables the controller.

VIA 1394 [Enabled]

[Enabled]

Enables the onboard IEEE 1394a controller.

[Disabled]

Disables the controller.

PCI Express X16_3 slot (black) bandwidth [Auto]

Allows you to select the PCI Express X16_3 slot (black) bandwidth.

[Auto]

PCIeX16_3 slot runs at X1 mode for system resource optimization.

(PCIeX1_2 will be disabled.)

[X4 mode]

PCIeX16_3 slot runs at X4 mode for high performance support. (USB3_34,

eSATA ports, PCIeX1_1, PCIeX1_2 will be disabled.)

[X1 mode]

PCIeX16_3 slot runs at X1 mode with all slots enabled. (USB3_34 will be

disabled.)

Marvell Storage Controller [Enabled]

Allows you to select the Marvell storage controller operating mode.
[Disabled]

Disables the controller.

[Enabled]

Set to [Enabled] when you want the SATA hard disk drives to use the AHCI

(Advanced Host Controller Interface). The AHCI allows the onboard storage

driver to enable advanced Serial ATA features that increases storage

performance on random workloads by allowing the drive to internally

optimize the order of commands.

Marvell Storage OPROM [Enabled]

This item appears only when you set the previous item to [Enabled] and allows you to enable

or disable the OptionRom of the Marvell storage controller.

Configuration options: [Enabled] [Disabled]

JMB Storage Controller [Enabled]

Allows you to enable or disable the JMB storage controller.

Configuration options: [Disabled] [Enabled]

If you want to use the full functin of the JMB storage contorller (ex. AHCI), we recommend

that you set this item to [Enabled] and install the

JMicron JMB36X Controller Driver

from

the motherboard support DVD.

Summary of Contents for P8H67-V REV 3.0









































































































































Search results

Summary of Contents for P8H67-V REV 3.0

Reviews:

Related manuals for P8H67-V REV 3.0

Brands by name

Popular brands

Asus P8H67-V REV 3.0, User Manual

Search results

Summary of Contents for P8H67-V REV 3.0

Reviews:

Related manuals for P8H67-V REV 3.0

Brands by name

Popular brands