Asus P8H61 User Manual Download

Page: 64 / 73

2-24

ASUS P8H61 Series

2.6.3

CPU Q-Fan Control [Enabled]

[Disabled]

Disables the CPU Q-Fan control feature.

[Enabled]

Enables the CPU Q-Fan control feature.

CPU Fan Speed Low Limit [600 RPM]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows you to

disable or set the CPU fan warning speed. Configuration options: [Ignore] [200 RPM] [300

RPM] [400 RPM] [500 RPM] [600 RPM]

CPU Fan Profile [Standard]

This item appears only when you enable the

CPU Q-Fan Control

feature and allows

you to set the appropriate performance level of the CPU fan.

[Standard] Sets to [Standard] to make the CPU fan automatically adjust depending on

the CPU temperature.

[Silent]

Sets to [Silent] to minimize the fan speed for quiet CPU fan operation.

[Turbo]

Sets to [Turbo] to achieve maximum CPU fan speed.

[Manual] Sets to [Manual] to assign detailed fan speed control parameters.

The following four items appear only when you set

CPU Fan Profile

to [Manual].

CPU Upper Temperature [70]

Use the <+> and <-> keys to adjust the upper limit of the CPU temperature. The values range

from 20ºC to 75ºC.

CPU Fan Max. Duty Cycle(%) [100]

Use the <+> and <-> keys to adjust the maximum CPU fan duty cycle. The values range from

20% to 100%. When the CPU temperature reaches the upper limit, the CPU fan will operate at

the maximum duty cycle.

CPU Lower Temperature [20]

Displays the lower limit of the CPU temperature.

CPU Fan Min. Duty Cycle(%) [20]

Use the <+> and <-> keys to adjust the minimum CPU fan duty cycle. The values range from 0%

to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate at the minimum

duty cycle.

2.6.4

Chassis Q-Fan Control [Enabled]

[Disabled]

Disables the Chassis Q-Fan control feature.

[Enabled]

Enables the Chassis Q-Fan control feature.

Chassis Fan Speed Low Limit [600 RPM]

This item appears only when you enable the

Chassis Q-Fan Control

feature and allows you

to disable or set the chassis fan warning speed. Configuration options: [Ignore] [200 RPM]

[300 RPM] [400 RPM] [500 RPM] [600 RPM]

Summary of Contents for P8H61










































































Search results

Summary of Contents for P8H61

Reviews:

Related manuals for P8H61

Brands by name

Popular brands

Asus P8H61, User Manual

Search results

Summary of Contents for P8H61

Reviews:

Related manuals for P8H61

Brands by name

Popular brands