Asus P8H61 User Manual Download

Page: 35 / 73

1-23

Chapter 1: Product introduction

USB 2.0 ports 1 and 2.

These two 4-pin Universal Serial Bus (USB) ports are for USB

2.0/1.1 devices.

USB 2.0 ports 3 and 4 (P8H61 and P8H61 PLUS only).

These two 4-pin Universal

Serial Bus (USB) ports are for USB 2.0/1.1 devices.

USB 3.0 ports 1 and 2 (P8H61/USB3 only).

These two 9-pin Universal Serial Bus

(USB) ports connect to USB 3.0/2.0 devices.

• DO NOT connect a keyboard / mouse to any USB 3.0 port when installing Windows

operating system.

• Due to USB 3.0 controller limitation, USB 3.0 devices can only be used under Windows

OS environment and after the USB 3.0 driver installation.

• USB 3.0 devices can only be used as data storage only.
• We strongly recommend that you connect USB 3.0 devices to USB 3.0 ports for faster

and better performance for your USB 3.0 devices.

Serial port.

This 9-pin COM1 port is for pointing devices or other serial devices.

10. PS/2 Keyboard port (purple).

This port is for a PS/2 keyboard.

1.10.2

Internal connectors

Front panel audio connector (10-1 pin AAFP)

This connector is for a chassis-mounted front panel audio I/O module that supports

either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel

audio I/O module cable to this connector.

• We recommend that you connect a high-definition front panel audio module to this

connector to avail of the motherboard’s high-definition audio capability.

•

If you want to connect a high-definition front panel audio module to this connector, set

the

Front Panel Type

item in the BIOS setup to

[HD]

. If you want to connect an AC'97

front panel audio module to this connector, set the item to

[AC97]

. By default, this

connector is set to

[HD]

See section

2.5.6 Onboard Devices Configuration

for details.

P8H61 Series

P8H61 Series Front panel audio connector

AAFP

PIN 1

SENSE2_RETUR

SENSE1_RETUR

PRESENCE#

GND

PORT2 L
SENSE_SEND
PORT2 R
PORT1 R
PORT1 L

HD-audio-compliant

pin definition

NC
NC

AGND

Line out_L
NC
Line out_R
MICPWR
MIC2

Legacy AC’97

compliant definition

Summary of Contents for P8H61










































































Search results

Summary of Contents for P8H61

Reviews:

Related manuals for P8H61

Brands by name

Popular brands

Asus P8H61, User Manual

Search results

Summary of Contents for P8H61

Reviews:

Related manuals for P8H61

Brands by name

Popular brands