Chapter 2: BIOS information
2-17
2.5.2
PCH Configuration
High Precision Timer [Enabled]
Allows you to enable or disable the High Precision Event Timer.
Configuration options: [Enabled] [Disabled]
The following three items appear only when you set the
Intel(R) Rapid Start
Technology
to [Enabled].
Entry on S3 RTC Wake [Enabled]
Allows you to enable or disable the iFFS invocation upon S3 RTC wake.
Configuration options: [Enabled] [Disabled]
Entry After [10 Minutes]
This item appears only when you set the
Entry on S3 RTC Wake
to [Enabled]
and allows you to set the RTC wake timer at S3 entry. Configuration options:
[Immediately] [1 minute] [2 minute] [5 minute] [10 minute] [15 minute] [30 minute] [1
hour] [2 hours]
Active Page Threshold Support [Disabled]
Allows you to enable or disable the Active Page Threshold Support. Configuration
options: [Enabled] [Disabled]
Entry on S3 RTC Wake [Enabled]
Allows you to enable or disable the iFFS invocation upon S3 RTC wake.
Configuration options: [Enabled] [Disabled]
Entry After [10 Minutes]
This item appears only when you set the
Entry on S3 RTC Wake
to [Enabled]
and allows you to set the RTC wake timer at S3 entry. Configuration options:
[Immediately] [1 minute] [2 minute] [5 minute] [10 minute] [15 minute] [30 minute] [1
hour] [2 hours]
Active Page Threshold Support [Disbaled]
Allows you to enable or disable the Active Page Threshold Support. Configuration
options: [Enabled] [Disabled]
Active Memory Threshold [x]
This item appears only when you set the
Active Page Threshold Support
to
[Enabled] and allows you to set the Active Memory Threshold. When the partition
size is larger than the Active Page Threshold size, the system will try to support
the Intel(R) Rapid Start Technology. When the item is set to zero, the system
automatically checks whether the partition size is enough at S3 entry. Key in the
desired value using the numeric keypad.
Intel(R) Rapid Start Technology
Intel(R) Rapid Start Technology [Disabled]
Allows you to enable or disable the Intel(R) Rapid Start Technology.Configuration options:
[Enabled] [Disabled]
