ASUS P8B-X
5-5
5.2
Intel
®
Rapid Storage Technology
Option ROM Utilitys
The Intel
®
Rapid Storage Technology Option ROM utility allows you to create RAID 0,
RAID 1, RAID 10 (RAID 1+0), and RAID 5 set(s) from Serial ATA hard disk drives
that are connected to the Serial ATA connectors supported by the Southbridge.
To enter the Intel
®
Rapid Storage Technology option ROM utility:
1. Install all the Serial ATA hard disk drives.
2. Turn on the system.
3. During POST, press <Ctrl+I> to display the utility main menu.
The navigation keys at the bottom of the screen allow you to move through
the menus and select the menu options.
The RAID BIOS setup screens shown in this section are for reference only and
may not exactly match the items on your screen.
Intel(R) Rapid Storage Technology - Option ROM - 10.1.0.1008
Copyright(C) 2003-10 Intel Corporation. All Rights Reserved.
[
MAIN MENU
]
1. Create RAID Volume
3. Reset Disks to Non-RAID
2. Delete RAID Volume
4. Recovery Volume Options
5. Exit
[
DISK/VOLUME INFORMATION
]
RAID Volumes:
*
= Data is Encrypted
None defined.
Physical Devices:
Port Drive Model Serial # Size Type/Status(Vol ID)
0 ST3160812AS 9LS0HJA4 149.0GB
Non-RAID Disk
1 ST3160812AS 9LS0F4HL 149.0GB
Non-RAID Disk
2 ST3160812AS 3LS0JYL8 149.0GB
Non-RAID Disk
3 ST3160812AS 9LS0BJ5H 149.0GB
Non-RAID Disk
[
↑↓
]-Select
[ESC]-Exit [ENTER]-Select Menu
Summary of Contents for P8B-X
