Asus P8B-X User Manual Download Page 78

Page: 78 / 128

4-20

Chapter 4: BIOS setup

4.5.9

USB Configuration

Advanced

Enables Legacy USB support.

AUTO option disables legacy

support if no USB devices are

connected. DISABLE option will

keep USB devices available

only for EFI applications.

USB Configuration
USB Devices

1 Mouse, 2 Hubs

Legacy USB Support

[Enabled]

EHCI Hand-off

[Disabled]

USB hardware delays and time-out:

USB transfer time-out

[20 sec]

Device reset time-out

[20 sec]

Device power-up delay

[Auto]

The

USB Devices

item shows the auto-detected values. If no USB device is

detected, the item shows

None

Legacy USB Support [Enabled]

Allows you to enable or disable support for legacy USB devices. Setting to [Auto]

allows the system to detect the presence of USB devices at startup. If detected, the

USB controller legacy mode is enabled. If no USB device is detected, the legacy

USB support is disabled. Configuration options: [Disabled] [Enabled] [Auto]

EHCI Hand-off [Disabled]

Enables or disables the BIOS EHCI hand-off support.

Configuration options: [Disabled] [Enabled]

4.5.8

Intel TXT(LT) Configuration

Advanced

Enables Legacy USB support.

AUTO option disables legacy

support if no USB devices are

connected. DISABLE option will

keep USB devices available

only for EFI applications.

Intel Trusted Execution Technology Configuration

Intel TXT support only can be enabled/disabled if SMX

is enabled. VT and VT-d support must also be enabled

prior to TXT.

Secure Mode Extensions (SMX)

Enabled

Intel TXT(LT) Support

[Disabled]

Intel TXT(LT) Support [Disabled]

Allows you to enable or disable the Intel Trusted Execution Technology (TXT)

feature. Configuration options: [Disabled] [Enabled]

The

Intel TXT(LT) Support

item requires a Trusted Platform Module (TPM) to

be installed on the motherboard to enable.

Summary of Contents for P8B-X

































































































































Search results

Summary of Contents for P8B-X

Reviews:

Related manuals for P8B-X

Brands by name

Popular brands

Asus P8B-X, User Manual

Search results

Summary of Contents for P8B-X

Reviews:

Related manuals for P8B-X

Brands by name

Popular brands