manualshive.com logo in svg

Asus P7P55 - WS SuperComputer Motherboard, User Manual

Share
Download
Asus P7P55 - WS SuperComputer Motherboard User Manual Download Page 97

ASUS P7P55 WS Supercomputer

3-33

Chassis Q-Fan Control [Disabled]

[Disabled] 

Disables the Chassis Q-Fan control feature.

[Enabled] 

Enables the Chassis Q-Fan control feature.

Chassis Fan Profile [Standard]
This item appears only when you enable the 

Chassis Q-Fan Control

 feature 

and allows you to set the appropriate performance level of the chassis fan.
[Standard]  Sets to [Standard] to make the chassis fan automatically adjust 

depending on the chassis temperature.

[Silent]   Sets to [Silent] to minimize the fan speed for quiet chassis fan 

operation.

[Turbo]  Set to [Turbo] to achieve maximum chassis fan speed.

CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through 

the onboard voltage regulators. Select 

Ignored

 if you do not want to detect this 

item.

Summary of Contents for P7P55 - WS SuperComputer Motherboard





























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands