Asus P735 User Manual Download

Page: 88 / 150

Available capture modes

Your device camera can be set to two capture modes:

•

Camera mode

- Camera mode allows you to take photos, and save them to your device

or MiniSD. You can also configure the camera to match an environment, set picture size,
select magnification, adjust the picture quality, apply effects, and modify other advanced

settings.

•

Video mode

- Video mode enables you to record audio/video clips. Like in camera

mode, it also allows you to select the magnification, set the video size, enable flash light,

enable macro mode, apply some effects, select target storage, and modify advanced
video settings.

Supported formats

Using the camera mode or video mode, the images or video clip captured are stored in the
following formats:

• Still image (Camera mode)

- JPEG (.jpg)

• Video mode)

- 3GP (.3gp), MPEG-4 (.mp4)

Summary of Contents for P735























































































































































Search results

Summary of Contents for P735

Reviews:

Related manuals for P735

Brands by name

Popular brands

Asus P735, User Manual

Search results

Summary of Contents for P735

Reviews:

Related manuals for P735

Brands by name

Popular brands