manualshive.com logo in svg

Asus P6T7 WS SuperComputer - Motherboard - SSI CEB, User Manual

Share
Download
Asus P6T7 WS SuperComputer - Motherboard - SSI CEB User Manual Download Page 59

2.7.3.  ASUS Q-Connector (system panel)

Use the ASUS Q-Connector to connect/disconnect the chassis front panel cables.

1.  Connect the front panel cables to the 

ASUS Q-Connector. 

 

Refer to the labels on the Q-Connector 

to know the detailed pin definitions, and 

then match them to their respective 

front panel cable labels.

The labels on the front panel 

cables may vary depending on 

the chassis model.

IDE_LED

POWER SW

RESET SW

IDE_LED-

PWR

Reset

Ground

Ground

2.  Install the ASUS Q-Connector to the 

system panel connector, ensuring the 

orientation matches the labels on the 

motherboard.

3.  The front panel functions are now 

enabled. The figure shows the 

 

Q-Connector is properly installed on the 

motherboard.

ASUS P6T7 WS SuperComputer

2-33

Summary of Contents for P6T7 WS SuperComputer - Motherboard - SSI CEB

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands