manualshive.com logo in svg

Asus P6T7 WS SuperComputer - Motherboard - SSI CEB, User Manual

Share
Download
Asus P6T7 WS SuperComputer - Motherboard - SSI CEB User Manual Download Page 50

2.7.2 

Internal connectors

1.  TPM connector (20-1 pin TPM) [Optional]

This connector supports a Trusted Platform Module (TPM) system, which can 

securely store keys, digital certificates, passwords, and data. A TPM system 

also helps enhance network security, protects digital identities, and ensures 

platform integrity.

The TPM module is purchased separately.

2.  IEEE 1394a port connector (10-1 pin IE1394_2)

This connector is for an IEEE 1394a port. Connect the IEEE 1394a module 

cable to this connector, then install the module to a slot opening at the back 

of the system chassis. 

Never connect a USB cable to the IEEE 1394a connector. Doing so will damage 

the motherboard!

You can attach a FireWire/1394 cable to this connector if your chassis suppots 

the front panel IEEE1394 port.

2-24

Chapter 2: Hardware information

Summary of Contents for P6T7 WS SuperComputer - Motherboard - SSI CEB

























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands