Asus P5V-VM SE DH User Manual Download Page 59

Page: 59 / 110

ASUS P5VD2-VM/P5V-VM SE DH

2-9

2.1.5

ASUS CrashFree BIOS 2 utility

The ASUS CrashFree BIOS 2 is an auto recovery tool that allows you to restore

the BIOS file when it fails or gets corrupted during the updating process. You can

update a corrupted BIOS file using the motherboard support CD or the floppy disk

that contains the updated BIOS file.

Recovering the BIOS from a floppy disk

To recover the BIOS from a floppy disk:

1. Turn on the system.

2. Insert the floppy disk with the original or updated BIOS file to the floppy disk

drive.

3. The utility displays the following message and automatically checks the

floppy disk for the original or updated BIOS file.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...

4. Restart the system after the utility completes the updating process.

Bad BIOS checksum. Starting BIOS recovery...
Checking for floppy...
Floppy found!
Reading file “P5VD2VM.ROM”. Completed.
Start flashing...

When found, the utility reads the BIOS file and starts flashing the corrupted

BIOS file.

DO NOT shut down or reset the system while updating the BIOS! Doing so can

cause system boot failure!

• Prepare the motherboard support CD or the floppy disk containing the

updated motherboard BIOS before using this utility.

• Make sure that you rename the original or updated BIOS file in the floppy

disk to P5VD2VM.ROM/P5VVMSEDH.ROM.

To use CrashFree BIOS2 feature on motherboards with onboard VGA, you

will not see the screen display when the BIOS crashes even when you reboot

the system. Install a graphics card into the expansion slot before rebooting the

computer to display BIOS recovery message.

Summary of Contents for P5V-VM SE DH















































































































Search results

Summary of Contents for P5V-VM SE DH

Reviews:

Related manuals for P5V-VM SE DH

Brands by name

Popular brands

Asus P5V-VM SE DH, User Manual

Search results

Summary of Contents for P5V-VM SE DH

Reviews:

Related manuals for P5V-VM SE DH

Brands by name

Popular brands