4-34
Chapter 4: BIOS setup
4.7.3
Security
The
Security
menu items allow you to change the system security settings. Select
an item then press
<Enter>
to display the configuration options.
Select Screen
Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
v02.61 (C)Copyright 1985-2008, American Megatrends, Inc.
Security Settings
Supervisor Password
:Not Installed
User Password
:Not Installed
Change Supervisor Password
Change User Password
<Enter> to change
password.
<Enter> again to
disabled password.
BIOS SETUP UTILITY
Boot
Hit ‘DEL’ Message Display [Enabled]
When set to
Enabled
, the system displays the message
Press DEL to run Setup
during POST. Configuration options: [Disabled] [Enabled]
Interrupt 19 Capture [Disabled]
When set to
[Enabled]
, this function allows the option ROMs to trap Interrupt 19.
Configuration options: [Disabled] [Enabled]
Change Supervisor Password
Select this item to set or change the supervisor password. The
Supervisor
Password
item on top of the screen shows the default
Not Installed
. After you set
a password, this item shows
Installed
.
To set a Supervisor Password:
1. Select the
Change Supervisor Password
item and press
<Enter>
.
2. On the password box, key in a password containing up to six letter or
numbers, or both, then click
<Enter>
.
3. Confirm the password when prompted.
The message
Password Installed
appears after you successfully set your
password.
To change the supervisor password, follow the same steps in setting a supervisor
password.
Summary of Contents for P5QLD PRO
Page 1: ...Motherboard P5QLD PRO ...
Page 56: ...2 34 Chapter 2 Hardware information ...
Page 148: ...A Appendix CPU features ...
