2-12
Chapter 2: BIOS information
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel
®
SpeedStep
®
Technology. When set to
[Enabled]
, you can adjust the system power settings in the operating system to
use the EIST feature. Set this item to
[Disabled]
if you do not want to use the EIST.
Configuration options: [Enabled] [Disabled]
2.4.3
Chipset
The
Chipset
menu allows you to change the advanced chipset settings. Select an item then
press
<Enter>
to display the submenu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Configuration options: [Disabled] [Enabled]
Configure DRAM Timing by SPD [Enabled]
Allows you to enable or disable configuring the DRAM Timing by SPD.
Configuration options: [Enabled] [Disabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]
IGD Graphics Mode Select [Enabled, 32MB]
Sets the IGD graphics mode.
Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 64MB] [Enabled, 128MB]
DVMT Mode Select [DVMT Mode]
Allows you to select the graphics memory type.
Configuration options: [DVMT Mode]
DVMT Memory [256MB]
Configuration options: [128MB] [256MB] [Maximum DVMT]
The following item appears only when you installed an Intel
®
CPU that supports the
Enhanced Intel
®
SpeedStep
®
Technology (EIST).
This option only appears when installing 1GB DDR2 DIMMs into the DIMM sockets.
Protect Audio Video Path Mode [Disabled]
Allows you to set PAVP mode.
Configuration options: [Disabled] [Lite] [Paranoid]
Summary of Contents for P5QL-CM
Page 1: ...Motherboard P5QL CM ...
