background image

ASUS P5P43TD/USB3

2-15

The following item appears only when you installed an Intel

®

 CPU that supports the 

Enhanced Intel

®

 SpeedStep

®

 Technology (EIST). 

Intel(R) SpeedStep(TM) Tech [Enabled]

Allows you to use the Enhanced Intel

®

 SpeedStep

®

 Technology. When set to [Enabled], you 

can adjust the system power settings in the operating system to use the EIST feature. Set 

this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled] 

[Disabled]

Intel(R) C-STATE Tech [Enabled]

Allows you to enable or disable the Intel

®

 C-STATE Technology. When set to [Enabled], the 

CPU idle is set to C2/C3/C4. Configuration options: [Enabled] [Disabled]

2.5.2 

Chipset

The 

Chipset

 menu allows you to change the advanced chipset settings. Select an item then 

press 

<Enter>

 to display the submenu.

North Bridge Configuration

Memory Remap Feature [Enabled]

Allows you to enabled or disable the remapping of the overlapped PCI memory above the 

total physical memory. Enable this option only when you install 64-bit operating system. 

Configuration options: [Disabled] [Enabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to decide which graphics controller to use as the primary boot device. 

Configuration options: [PCI/PEG] [PEG/PCI]

2.5.3 

Onboard Devices Configuration

High Definition Audio [Enabled]

Allows you to enable or disable the high definition audio. 

 

Configuration options: [Enabled] [Disabled]

Front Panel Type [HD Audio]

Allows you to select the front panel type. If High Definition Audio Front Panel used, 

please set HD Audio mode. Configuration options: [AC97] [HD Audio]

JMB368 IDE [Enabled]

Allows you to enable or disable the JMB368 IDE controller.  

Configuration options: [Disabled] [Enabled]

JMB368 IDE BOOT ROM [Enabled]

Allows you to enable or disable the JMB368 IDE Boot ROM. This item appears only 

when the JMB368 IDE item is set to Enabled. 

Configuration options: [Disabled] [Enabled]

Summary of Contents for P5P43T-SI

































































Reviews: