ASUS P5KPL IPC/SI
1-15
8.
Serial ATA connectors (7-pin SATA1-4)
These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk
drives and optical disk drives. The Serial ATA 3Gb/s is backward compatible with the
Serial ATA 1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster
than the standard parallel ATA (133 Mb/s).
7.
Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either HD Audio or legacy AC`97 audio standard. Connect one end of the front panel
audio I/O module cable to this connector.
• We recommend that you connect a high-definition front panel audio module to this
connector to avail of the motherboard’s high-definition audio capability.
•
If you want to connect a high-definition front panel audio module to this connector, set
the
Front Panel Support Type
item in the BIOS setup to
[HD Audio]. If
you want to
connect an AC'97 front panel audio module to this connector, set the item to
[AC97]
. By
default, this connector is set to
[HD Audio]
.
See section
2.4.3 Chipset
for details.
The numbers (1, 3, 2, 4) on the SATA ports only indicate the order that the SATA devices
are detected and will not affect the use of the SATA devices.
Summary of Contents for P5KPL IPC SI
Page 1: ...Motherboard P5KPL IPC SI ...
