Asus P5G41T-M LX V2 User Manual Download

Page: 50 / 62

2-12

Chapter 2: BIOS information

2.4.3

Chipset

The Chipset menu allows you to change the advanced chipset settings. Select an item then

press <Enter> to display the sub-menu.

North Bridge Configuration

Memory Remap Feature [Enabled]

Allows you to enable or disable the remapping of overlapped PCI memory above the total

physical memory. Configuration options: [Disabled] [Enabled]

Configure DRAM Timing by SPD [Enabled]

Allows you to enable or disable configurating DRAM Timing by SPD.

Configuration options: [Enabled] [Disabled]

Initiate Graphic Adapter [PEG/PCI]

Allows you to select the graphics controller as the primary boot device.

Configuration options: [IGD] [PCI/IGD] [PCI/PEG] [PEG/IGD] [PEG/PCI]

IGD Graphics Mode Select [Enabled, 32MB]

Allows you to select the amout of system memory used by the Interanal graphics device.

Configuration options: [Disabled] [Enabled, 32MB] [Enabled, 48MB] [Enabled, 64MB]

[Enabled, 128MB] [Enabled, 256MB]

GTT Graphics Memory Size [No VT mode, 2MB]

This item is not user- configurable.

The following item appears only when you installed an Intel

Pentium

4 or later CPU that

supports the Enhanced Intel SpeedStep

Technology (EIST).

Intel(R) SpeedStep(TM) Tech [Enabled]

Allows you to use the Enhanced Intel

SpeedStep

Technology. When set to [Enabled], you

can adjust the system power settings in the operating system to use the EIST feature. Set this

item to [Disabled] if you do not want to use the EIST.

Configuration options: [Enabled] [Disabled]

CPU TM Function [Enabled]

Enables or disables Intel

CPU Thermal Monitor (TM) function, a CPU overheating protection

function. When enabled, the CPU core frequency and voltage are reduced when the CPU

overheats. Configuration options: [Disabled] [Enabled]

Execute-Disable Bit Capability [Enabled]

Allows you to enable or disable the No-Execution Page Protection Technology. Setting this

item to

[Disabled]

forces the XD feature flag to always return to zero (0).

Configuration options: [Disabled] [Enabled]

Summary of Contents for P5G41T-M LX V2































































Search results

Summary of Contents for P5G41T-M LX V2

Reviews:

Related manuals for P5G41T-M LX V2

Brands by name

Popular brands

Asus P5G41T-M LX V2, User Manual

Search results

Summary of Contents for P5G41T-M LX V2

Reviews:

Related manuals for P5G41T-M LX V2

Brands by name

Popular brands