manualshive.com logo in svg

Asus P5E3 WS PRO, User Manual

Share
Download
Asus P5E3 WS PRO User Manual Download Page 141

ASUS P5E3 WS Professional

5-29

5.4.2 

Installing Serial ATA hard disks

The motherboard supports Serial ATA hard disk drives. For optimal performance, 

install identical drives of the same model and capacity when creating a disk array.

To install the SATA hard disks for a RAID configuration:

1.  Install the SATA hard disks into the drive bays.
2.  Connect the SATA signal cables.
3.  Connect a SATA power cable to the power connector on each drive.

5.4.3 

Intel

®

 RAID configurations

This motherboard supports RAID 0, RAID 1, RAID 5, RAID 10 and Intel

®

 Matrix 

Storage configurations for Serial ATA hard disks drives through the Intel

®

 ICH9R 

Southbridge chip.

See Chapter 4 for details on entering and navigating through the BIOS Setup.

Setting the RAID item in BIOS

You must set the RAID item in the BIOS Setup before you can create a RAID 

set(s). To do this:
1.  Enter the BIOS Setup during POST.

2.  Go to the Main Menu, select 

SATA Configuration

, then press <Enter>.

3.  Select the item 

Configure SATA as

, then press <Enter> to display the 

configuration options.

4.  Select 

RAID

 from the 

Configure SATA as

 item options, then press <Enter>.

5.  Select the item Onboard Serial-ATA BOOTROM, press <Enter>, then select 

Enabled from the options.

6.  Save your changes, then exit the BIOS Setup.

Summary of Contents for P5E3 WS PRO













































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands