Asus P5E WS PROFESSIONAL User Manual Download Page 84

Page: 84 / 172

4-14

Chapter 4: BIOS setup

PIO Mode [Auto]

Selects the PIO mode.

Configuration options: [Auto] [0] [1] [2] [3] [4]

DMA Mode [Auto]

Selects the DMA mode. Configuration options: [Auto] [SWDMA0] [SWDMA1]

[SWDMA2] [MWDMA0] [MWDMA1] [MWDMA2] [UDMA0] [UDMA1] [UDMA2]

[UDMA3] [UDMA4] [UDMA5]

SMART Monitoring [Auto]

Sets the Smart Monitoring, Analysis, and Reporting Technology.

Configuration options: [Auto] [Disabled] [Enabled]

32Bit Data Transfer [Enabled]

Enables or disables 32-bit data transfer.

Configuration options: [Disabled] [Enabled]

SATA Configuration [Enhanced]

Configuration options: [Disabled] [Compatible] [Enhanced]

Configure SATA as [IDE]

Sets the configuration for the Serial ATA connectors supported by the

Southbridge chip. Configuration options:

[IDE] [RAID] [AHCI]

The AHCI allows the onboard storage driver to enable advanced Serial

ATA features that increases storage performance on random workloads by

allowing the drive to internally optimize the order of commands.

If you want to create a RAID 0, RAID 1, RAID 5, RAID 10, or the Intel

Matrix

Storage Technology configuration from the Serial ATA hard disk drives, set

this item to [RAID].

4.3.6

SATA Configuration

The items in this menu allow you to set or change the configurations for the SATA

devices installed in the system. Select an item then press <Enter> if you want to

configure the item.

SATA Configuration

SATA Configuraton

[Enhanced]

Configure SATA as

[IDE]

Hard Disk Write Protect

[Disabled]

SATA Detect Time Out (Sec)

[35]

Options

Disabled

Compatiable

Enhanced

Summary of Contents for P5E WS PROFESSIONAL













































































































































































Search results

Summary of Contents for P5E WS PROFESSIONAL

Reviews:

Asus P5E WS PROFESSIONAL, User Manual, Page: 84 / 172

Search results

Summary of Contents for P5E WS PROFESSIONAL

Reviews: