Asus P5E WS PROFESSIONAL User Manual Download Page 13

Page: 13 / 172

xiii

P5E WS Professional specifications summary

ASUS special features

ASUS MyLogo2™

ASUS CrashFree BIOS 3

ASUS C.P.R.

ASUS EZ Flash 2

SFS (Stepless Frequency Selection) at 1 MHz increment

ASUS 8-phase Power Design

ASUS Stack Cool 2

Internal connectors

3 x USB connectors support six additional USB ports

1 x Floppy disk drive connector

1 x IDE connector

8 x Serial ATA connectors

1 x CPU fan connector with PWM control

2 x Chassis fan conectors with Q-fan control

1 x Power fan connector

1 x IEEE1394a connector

1 x COM connector

1 x TPM connector

1 x Chassis intrusion connector

1 x Front panel audio connector

1 x CD audio in connector

1 x 24-pin ATX power connector

1 x 8-pin ATX +12 V power connector

1 x 20-pin panel connector

Rear panel connectors

1 x PS/2 keyboard port

2 x External Serial ATA port

1 x Coaxial S/PDIF Out port

1 x Optical S/PDIF Out port

1 x IEEE1394a

2 x LAN (RJ-45) ports

6 x USB 2.0/1.1 ports

8-channel audio ports

BIOS features

16 Mb Flash ROM, AMI BIOS, PnP, DMI 2.0, WfM2.0,

SMBIOS 2.3, ACPI 2.0a, ASUS EZ Flash 2, ASUS

CrashFree BIOS 3

Manageability

WOL by PME, WOR by PME, PXE, AI NET 2, Chassis

Intrusion, BIOS flash utility under DOS

Support DVD contents

AI Booster

ASUS PC Probe II

Antivirus software

Adobe

Acrobat Reader ver 7.0

Microsoft

Direct X ver 9.0C

Form factor

ATX form factor: 12 in x 9.6 in (30.5 cm x 24.5 cm)

*Specifications are subject to change without notice.

Summary of Contents for P5E WS PROFESSIONAL













































































































































































Search results

Summary of Contents for P5E WS PROFESSIONAL

Reviews:

Asus P5E WS PROFESSIONAL, User Manual, Page: 13 / 172

Search results

Summary of Contents for P5E WS PROFESSIONAL

Reviews: