Asus P5BV-C - Motherboard - ATX User Manual Download Page 29

Page: 29 / 161

ASUS P5BV-C Series

2-9

2.3.2

Installing the CPU heatsink and fan

The Intel

Pentium

4 LGA775 processor requires a specially designed heatsink

and fan assembly to ensure optimum thermal condition and performance.

To install the CPU heatsink and fan:

1. Place the heatsink on top of the installed CPU, ensuring that the four

fasteners match the holes on the motherboard.

Make sure to orient each fastener with the narrow end of the groove pointing

outward.

Orient the heatsink and fan assembly such that the CPU fan cable is closest

to the CPU fan connector.

• Make sure that you use Intel

-certified multi-directional heatsink and fan

only.

• Make sure that you have installed the motherboard to the chassis before

you install the CPU fan and heatsink assembly.

• When you buy a boxed Intel

Pentium

4 processor, the package

includes the CPU fan and heatsink assembly.

• Your Intel

Pentium

4 LGA775 heatsink and fan assembly comes in a

push-pin design and requires no tool to install.

• If you purchased a separate CPU heatsink and fan assembly, make sure

that you have properly applied Thermal Interface Material to the CPU

heatsink or CPU before you install the heatsink and fan assembly.

Summary of Contents for P5BV-C - Motherboard - ATX


































































































































































Search results

Summary of Contents for P5BV-C - Motherboard - ATX

Reviews:

Brands by name

Popular brands

Asus P5BV-C - Motherboard - ATX, User Manual

Search results

Summary of Contents for P5BV-C - Motherboard - ATX

Reviews:

Brands by name

Popular brands