manualshive.com logo in svg

Asus P5B SE - Motherboard - ATX, User Manual, Page: 89 / 136

Share
Download
Asus P5B SE - Motherboard - ATX User Manual Download Page 89

ASUS P5B SE

4-2

Chassis Fan Speed [xxxxRPM] or [N/A] or [Ignored]

The onboard hardware monitor automatically detects and displays the chassis fan speed 
in rotations per minute (RPM). If the fan is not connected to the chassis, the specific field 
shows N/A. Select Ignored if you do not wish to display the detected speed.

VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage

The onboard hardware monitor automatically detects the voltage output through 
the onboard voltage regulators.

4.6 

Boot menu

The Boot menu items allow you to change the system boot options. Select an item 
then press <Enter> to display the sub-menu.

Boot settings

  Boot Device Priority

  Removable Drives

  Boot Settings Configuration

  Security

4.6.1 

Boot Device Priority

Boot Device Priority

1st Boot Device 

 [1st FLOPPY DRIVE]

2nd Boot Device 

 [Hard Drive]

3rd Boot Device 

 [ATAPI CD-ROM]

1st ~ xxth Boot Device [1st Floppy Drive]

These items specify the boot device priority sequence from the available devices. 
The number of device items that appears on the screen depends on the number of 
devices installed in the system. Configuration options: [st FLOPPY DRIVE] [Hard 
Drive] [ATAPI CD-ROM] [Disabled]

Summary of Contents for P5B SE - Motherboard - ATX









































































































































Reviews:

No comments