manualshive.com logo in svg

Asus P4S533-VM, User Manual

Share
Download
Asus P4S533-VM User Manual Download Page 91

ASUS P4S533-VM motherboard user guide

75

Load Setup Defaults

This option allows you to load the default values for each of the
parameters on the Setup menus. When you select this option or if you
press <F5>, a confirmation window appears. Select [Yes] to load default
values. Select Exit Saving Changes or make other changes before saving
the values to the non-volatile RAM.

Discard Changes

This option allows you to discard the selections you made and restore the
previously saved values. After selecting this option, a confirmation
appears. Select [Yes] to discard any changes and load the previously
saved values.

Save Changes

This option saves your selections without exiting the Setup program. You
can then return to other menus and make further changes. After you select
this option, a confirmation window appears. Select [Yes] to save any
changes to the non-volatile RAM.

Summary of Contents for P4S533-VM



























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands