Asus P4S333 User Manual Download Page 67

Page: 67 / 126

ASUS P4S333 motherboard user guide

4-3

1. Download an updated ASUS BIOS file from the Internet (WWW or

FTP) (see ASUS CONTACT INFORMATION on page x for details) and
save to the boot floppy disk you created earlier.

2. Boot from the floppy disk.

3. At the “A:\” prompt, type AFLASH and then press <Enter>.

4. At the Main Menu, type 2 then press <Enter>. The Update BIOS

Including Boot Block and ESCD screen appears.

5. Type the filename of your new BIOS and the path, for example,

A:\XXX-XX.XXX, then press <Enter>.

To cancel this operation, press <Enter>.

6. When prompted to confirm the BIOS update, press Y to start the

update.

Update the BIOS only if you have problems with the motherboard and
you are sure that the new BIOS revision will solve your problems.
Careless updating may result to more problems with the motherboard!

4.1.2 Updating BIOS procedures

Summary of Contents for P4S333































































































































Search results

Summary of Contents for P4S333

Reviews:

Related manuals for P4S333

Brands by name

Popular brands

Asus P4S333, User Manual

Search results

Summary of Contents for P4S333

Reviews:

Related manuals for P4S333

Brands by name

Popular brands