manualshive.com logo in svg

Asus P4B266-E, User Manual, Page: 109 / 142

Share
Download
Asus P4B266-E User Manual Download Page 109

ASUS P4B266-E motherboard user guide

5-3

5.2.3 Software menu

The software menu shows the applications and other software that the
motherboard supports. The highlighted items indicate that they are
available for your motherboard. Simply click on a specific item then follow
the installation wizard to install it.

The software menu is composed of two screens. Click on the 

Next 

button

on the lower right corner of the first screen to display the second menu
screen. To return to the first menu screen, click on the 

Back 

button on the

lower right corner of the second screen.

ASUS Update

This program allows you to download the latest version of the BIOS from
the ASUS website.

Before using the ASUS Update, make sure that you have an Internet
connection so you can connect to the ASUS website.

ASUS Screen Saver

This item installs the ASUS screen saver.

ASUS PC Probe

This smart utility monitors the fan speed, CPU temperature, and system
voltages, and alerts you on any detected problems. This utility helps you
keep your computer at a healthy operating condition.

Winbond Voice Editor

This program is for recording and customizing wave files for the ASUS
POST Reporter™. Use this program if you wish to change the default
vocal POST messages. See section “3.2 Vocal POST messages” for a list
of the default messages.

Summary of Contents for P4B266-E















































































































































Reviews:

No comments