Asus P3-PH4C User Manual Download Page 50

Page: 50 / 92

4-11

ASUS Pundit P3-PH4C

9. Optical drive audio connector (4-pin CD)

This connector is for the 4-pin audio cable that connects to the audio

connector at the back of the optical drive.

Enable the CD-IN function in the audio utility when using this

connector.

10. USB connectors (10-1 pin USB56, USB78)

These connectors are for USB 2.0 ports. Connect the USB module

cable to any of these connectors, then install the module to a slot

opening at the back of the system chassis. These USB connectors

comply with USB 2.0 specification that supports up to 480 Mbps

connection speed.

Never connect a 1394 cable to the USB connectors. Doing so will

damage the motherboard!

Internal Audio Connector

(black)

Right

udio Channel

Left

Audio Channel

Ground

USB 2.0 Connectors

USB78

USB+5V USB_P8- GND NC

USB+5V USB_P7-

GND

USB56

USB+5V USB_P6- GND NC

USB+5V USB_P5-

GND

The USB module is purchased separately.

Summary of Contents for P3-PH4C





























































































Search results

Summary of Contents for P3-PH4C

Reviews:

Related manuals for P3-PH4C

Brands by name

Popular brands

Asus P3-PH4C, User Manual

Search results

Summary of Contents for P3-PH4C

Reviews:

Related manuals for P3-PH4C

Brands by name

Popular brands