3-5
ASUS P2-P5G41/P4-P5G41
3.4
Connectors
1. Serial ATA connectors (7-pin SATA1, SATA2)
These connectors are for the Serial ATA signal cables for Serial ATA drives.
• Install Windows
®
XP Service Pack 1 before using Serial ATA drives.
• When using the connectors in
IDE mode, connect the primary (boot) hard disk
drive to the SATA1 connector.
2. COM port connector (10-1pin COM1)
This connector is for a serial (COM) port. Connect the serial port module
cable to this connector, then install the module to a slot opening at the back
of the system chassis.
P5Q8L
SATA2
GND
RSATA_RXN2
RSATA_RXP2
GND
RSATA_TXN2
RSATA_TXP2
GND
SATA1
GND
RSATA_RXN1
RSATA_RXP1
GND
RSATA_TXN1
RSATA_TXP1
GND
P5Q8L SATA Connectors (ICH7
®
)
P5Q8L COM Connector
P5Q8L
PIN 1
COM1
