manualshive.com logo in svg

Asus NCT-D, User Manual, Page: 88 / 112

Share
Download
Asus NCT-D User Manual Download Page 88

4 - 1 8

4 - 1 8

4 - 1 8

4 - 1 8

4 - 1 8

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

C h a p t e r   4 :   B I O S   s e t u p

4.4

Advanced menu

The Advanced menu items allow you to change the settings for the CPU
and other system devices.

4.4.1

4.4.1

4.4.1

4.4.1

4.4.1

Instant Music Configuration

Instant Music Configuration

Instant Music Configuration

Instant Music Configuration

Instant Music Configuration

Instant Music [Disabled]

Instant Music [Disabled]

Instant Music [Disabled]

Instant Music [Disabled]

Instant Music [Disabled]

Allows you to enable or disable the Instant Music feature in BIOS.
Configuration options: [Disabled] [Enabled]

Enabling Instant Music automatically disables the PS/2 keyboard power
up feature. See page 4-29 for details.

Instant Music Option

Instant Music

[Disabled]

If enabled, power up
by PS/2 keyboard
function will be
disabled.

Take caution when changing the settings of the Advanced menu items.
Incorrect field values can cause the system to malfunction.

Instant Music Configuration

Speech Configuration
PCI Express Configuration
USB Configuration
MPS Configuration

CPU Configuration
Chipset
Onboard Devices Configuration
PCI PnP

Configure Instant
Music

Instant Music CD-ROM Drive [IDE Secondary Master]

Instant Music CD-ROM Drive [IDE Secondary Master]

Instant Music CD-ROM Drive [IDE Secondary Master]

Instant Music CD-ROM Drive [IDE Secondary Master]

Instant Music CD-ROM Drive [IDE Secondary Master]

Allows you to select the CD-ROM drive that you wish to use for the Instant
Music playback. Configuration options: [IDE Primary Master]
[IDE Primary Slave] [IDE Secondary Master] [IDE Secondary Slave]

The I n s t a n t   M u s i c   C D - R O M   D r i v e  

I n s t a n t   M u s i c   C D - R O M   D r i v e  

I n s t a n t   M u s i c   C D - R O M   D r i v e  

I n s t a n t   M u s i c   C D - R O M   D r i v e  

I n s t a n t   M u s i c   C D - R O M   D r i v e  option appears only when you

enable the I n s t a n t   M u s i c  

I n s t a n t   M u s i c  

I n s t a n t   M u s i c  

I n s t a n t   M u s i c  

I n s t a n t   M u s i c  item.

Summary of Contents for NCT-D

















































































































Reviews:

No comments