manualshive.com logo in svg

Asus Motherboard NCL-D, User Manual, Page: 151 / 176

Share
Download
Asus Motherboard NCL-D User Manual Download Page 151

A S U S   N C L - D E   S e r i e s

A S U S   N C L - D E   S e r i e s

A S U S   N C L - D E   S e r i e s

A S U S   N C L - D E   S e r i e s

A S U S   N C L - D E   S e r i e s

5 - 4 5

5 - 4 5

5 - 4 5

5 - 4 5

5 - 4 5

5.4.10

5.4.10

5.4.10

5.4.10

5.4.10 Verifying a RAID set hard disk drive

Verifying a RAID set hard disk drive

Verifying a RAID set hard disk drive

Verifying a RAID set hard disk drive

Verifying a RAID set hard disk drive

To verify a RAID set hard disk drive:

1.

Select S C S I   D i s k   U t i l i t i e s  

S C S I   D i s k   U t i l i t i e s  

S C S I   D i s k   U t i l i t i e s  

S C S I   D i s k   U t i l i t i e s  

S C S I   D i s k   U t i l i t i e s  from the main menu options, then press

<Enter>.

2.

The screen displays the RAID set drives. Use the arrow keys to select
the hard disk drive you want to verify, then press <Enter>.

Summary of Contents for Motherboard NCL-D

















































































































































































Reviews:

No comments