Asus Motherboard AP130-E1 User Manual Download Page 77

Page: 77 / 92

ASUS PSCH-L motherboard

4-23

IDE Detect Time Out (Sec) [35]

Selects the time out value for detecting ATA/ATAPI devices. Configuration
options: [0] [5] [10] [15] [20] [25] [30] [35]

ATA(PI) 80Pin Cable Detection [Host & Device]

Selects the mechanism for detecting 80-pin ATA/ATAPI cable.
Configuration options: [Host & Device] [Host] [Device]

4.4.5 USB Configuration

The items in this menu allows you to change the USB-related features.
Select an item then press Enter to display the configuration options.

USB Configuration

Module Version - 2.23.2-7.4

USB Devices Enabled:
None

USB Function

[All USB Ports]

Legacy USB Port

[Enabled]

USB 2.0 Controller

[Enabled]

USB 2.0 Controller Mode

[HiSpeed]

Enables USB host
controllers.

USB Function [All USB Ports]

Allows you to set the number of USB ports to activate. Configuration
options: [Disabled] [2 USB Ports] [All USB Ports]

Legacy USB Support [Enabled]

Allows you to enable or disable support for legacy USB devices. Setting to
Auto disables the legacy support if no USB devices are connected.
Configuration options: [Disabled] [Enabled] [Auto]

The Module Version and USB Devices Enabled items show the auto-
detected values. If no USB device is detected, the item shows None.

Summary of Contents for Motherboard AP130-E1





























































































Search results

Summary of Contents for Motherboard AP130-E1

Reviews:

Related manuals for Motherboard AP130-E1

Brands by name

Popular brands

Asus Motherboard AP130-E1, User Manual

Search results

Summary of Contents for Motherboard AP130-E1

Reviews:

Related manuals for Motherboard AP130-E1

Brands by name

Popular brands