6
MAKING THE CONNECTIONS
Connecting the Signal Cable:
Plug one end of the VGA Cableto the LCD monitor
’
s VGA
port, the other end to the computer's VGA socket and tighten the two screws on the cable
connector. Moreover, for MM17T, you can buy an extra 24-Pin DVI-D cable from your dealer
for the digital signal connection if preferred.
Connecting the Power Cord:
Plug one end of the AC-power cord to the LCD monitor
’
s AC
input socket, the other end to the power outlet.
Connecting the Audio Cable (MM17T only):
Plug the audio cable between the computer
multi-media (or audio) card's audio output and
monitor's audio jack.
Caution:
If the AC outlet is not grounded (with three holes), install the proper grounding
adapter (not supplied).
Figure 2
1.
AC Input Socket
2.
Audio Jack (MM17T only)
3.
DVI-D Port (MM17T only)
4.
VGA (D-SUB) Port
5.
Earphone Jack (MM17T only)
6.
Cable Binder
