Asus ME99-VM User Manual Download Page 47 | Manualshive

Page: 47 / 80

background image

ASUS ME-99VM User’s Manual

47

4. BIOS SETUP

4. BIOS SETUP

Onboard FDC Controller [Enabled]

When [Enabled], this field allows you to connect your floppy disk drives to
the onboard floppy disk drive connector instead of a separate controller card.
If you want to use a different controller card to connect the floppy disk drives,
set this field to [Disabled]. Configuration options: [Disabled] [Enabled]

Onboard Serial Port 1 [3F8H/IRQ4]

This allows you to set the address for the onboard serial connector. Serial
Port 1 and Serial Port 2 must have different addresses. Configuration op-
tions: [3F8H/IRQ4] [2F8H/IRQ3] [3E8H/IRQ4] [2E8H/IRQ10] [Disabled]

Onboard Serial Port 2 [2F8H/IRQ3]

This allows you to set the address for the onboard serial connector. Serial
Port 1 and Serial Port 2 must have different addresses. Configuration op-
tions: [3E8H/IRQ4] [2E8H/IRQ10] [Disabled] [3F8H/IRQ4] [2F8H/IRQ3]

UART2 Use Infrared [Disabled]

When enabled, this field activates the onboard infrared feature and sets the
second serial UART to support the infrared module connector on the moth-
erboard. If your system already has a second serial port connected to the
onboard COM2 connector, it will no longer work if you enable the infrared
feature. By default, this field is set to [Disabled], which leaves the second
serial port UART to support the COM2 serial port connector. See IrDA-
Compliant Infrared Module Connector in 3.8 External Connectors. Con-
figuration options: [Disable] [Enabled]

4.4.2 I/O Device Configuration

I/O Device Config

«
...
45
46
47
48
49
...
»

Summary of Contents for ME99-VM

















































































Reviews:

No comments

Related manuals for ME99-VM

Brand: JETWAY Pages: 52

Brand: MSI Pages: 76

Brand: Texas Instruments Pages: 8

Brand: ASROCK Pages: 226

Brand: Intel Pages: 12

Brand: Gigabyte Pages: 81

Brand: JETWAY Pages: 56

Brand: Maxus Pages: 59

Brand: Gigabyte Pages: 96

Brand: Texas Instruments Pages: 20

Brand: Ublox Pages: 2

xPico Wi-Fi Series

Brand: Lantronix Pages: 29

Brand: ST Pages: 11

Brand: unicore Pages: 29

Brand: unicore Pages: 28

Brand: SOYO Pages: 32

Brand: SOYO Pages: 94

Brand: SOYO Pages: 98

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands