Asus ME99-VM User Manual Download Page 44 | Manualshive

Page: 44 / 80

background image

ASUS ME-99VM User’s Manual

44

4. BIOS SETUP

4. BIOS SETUP

4.4 Advanced

CPU Level 1 Cache, CPU Level 2 Cache [Enabled]

These fields allow you to choose from the default of [Enabled] or choose [Dis-
abled] to turn on or off the CPU’s Level 1 and Level 2 built-in cache.

CPU Level 2 Cache ECC Check [Disabled]

This function controls the ECC capability in the CPU level 2 cache.

BIOS Update [Enabled]

This functions as an update loader integrated into the BIOS to supply the proces-
sor with the required data. The BIOS will load the update on all processors during
system bootup in the default position of [Enabled].

Turbo Mode [Disabled]

Leave on default setting.

Floppy Disk Access Control [R/W]

This allows protection of files from the computer system to be copied to floppy
disks by allowing the setting of [Read Only] to only allow reads from the floppy
disk drive but not writes. The setup default [R/W] allows both reads and writes.

PS/2 Mouse Function Control [Auto]

The default of [Auto] allows the system to detect a PS/2 mouse on bootup. If
detected, IRQ12 will be used for the PS/2 mouse. IRQ12 will be reserved for ex-
pansion cards if a PS/2 mouse is not detected. [Enabled] will always reserve IRQ12,
whether on bootup a PS/2 mouse is detected or not.

OS/2 Onboard Memory > 64M [Disabled]

When using OS/2 operating systems with installed DRAM of greater than 64MB,
you need to set this option to [Enabled]; otherwise, leave this on [Disabled].

Advanced

Menu

«
...
42
43
44
45
46
...
»

Summary of Contents for ME99-VM

















































































Reviews:

No comments

Related manuals for ME99-VM

TI GE PHY HSMC CARD

Brand: Macnica Pages: 16

Brand: Yamaha Pages: 87

Brand: Yamaha Pages: 223

Brand: ASROCK Pages: 26

Brand: Texas Instruments Pages: 15

Brand: OLIMEX Pages: 26

Brand: Gigabyte Pages: 96

Brand: Pure Photonics Pages: 11

Brand: Texas Instruments Pages: 28

Brand: Texas Instruments Pages: 33

Brand: GigaDevice Semiconductor Pages: 16

Brand: ARK Pages: 44

Brand: IBASE Technology Pages: 64

Brand: IBASE Technology Pages: 83

Brand: SCT Pages: 2

Brand: CHAINTECH Pages: 49

Brand: OLIMEX Pages: 17

Brand: OLIMEX Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands