Asus Maximus VII Manual Download Page 142

Page: 142 / 224

3-54

Chapter 3: BIOS setup

Chapter 3

Click to start

the SSD Secure

Erase

Displays the

available SSDs

Status definition:

•

Frozen.

The frozen state is the result of a BIOS protective measure. The BIOS

guards drives that do not have password protection by freezing them prior to booting.

If the drive is frozen, a power off or hard reset of your PC must be performed to

proceed with the Secure Erase.

•

Locked.

SSDs might be locked if the Secure Erase process is either incomplete

or was stopped. This may be due to a third party software that uses a different

password defined by ASUS. You have to unlock the SSD in the software before

proceeding with Secure Erase.

3.9.3

Graphics Card Information

This item displays the information about the graphics card installed in your system.

Setup Animator [Disabled]

These item allows you enable or disable the Setup Animator.
Configuration options: [Disabled] [Enabled]

Summary of Contents for Maximus VII

































































































































































































































Search results

Summary of Contents for Maximus VII

Reviews:

Asus Maximus VII, Manual, Page: 142 / 224

Search results

Summary of Contents for Maximus VII

Reviews: