Asus Maximus VII Manual Download Page 123

Page: 123 / 224

ASUS MAXIMUS VII FORMULA

3-35

Chapter 3

3.6.4

System Agent Configuration

Graphics Configuration

Allows you to select a primary display from iGPU, and PCIe graphical devices.

Primary Display [Auto]

[Auto]

The primary display will be set to PCI-E when a PCI-E graphic

card is detected.

[CPU Graphics]

Force the primary display to be from the CPU Graphics.

[PCIE]

Force the primary display to be from the PCI-E graphic cards.

CPU Graphics Multi-Monitor [Disabled]

Enable this item for the Intel graphics render standby support to reduce the iGPU

power consumption when the system is idle. Configuration options: [Disabled]

[Enabled]

DMI Configuration

Enable this item for the DMI (Direct media interface) to run at PCI-E 2.0 speed.

DMI Gen 2 [Enabled]

Configuration options: [Enabled] [Disabled]

Summary of Contents for Maximus VII

































































































































































































































Search results

Summary of Contents for Maximus VII

Reviews:

Asus Maximus VII, Manual, Page: 123 / 224

Search results

Summary of Contents for Maximus VII

Reviews: