Asus MAXIMUS VI HERO Manual Download Page 175

Page: 175 / 182

ASUS MAXIMUS VI HERO

5-7

Chapter 5

Exiting the Intel

Rapid Storage Technology Option ROM utility

To exit the utility:

From the utility main menu, select

5. Exit

, and then press <Enter>. The following

warning message appears:

Are you sure you want to exit? (Y/N):

[ CONFIRM EXIT ]

5.2

Creating a RAID driver disk

A floppy disk with the RAID driver is required when installing a Windows

operating system

on a hard disk drive that is included in a RAID set.

The motherboard does not provide a floppy drive connector. You have to use a USB floppy

disk drive when creating a SATA RAID driver disk.

5.2.1

Creating a RAID driver disk without entering the OS

To create a RAID driver disk without entering the OS:

Boot your computer.

Press <Del> during POST to enter the BIOS setup utility.

3. Set the optical drive as the primary boot device.
4. Insert the support DVD into the optical drive.
5.

Save changes and exit BIOS.

6. When the Make Disk menu appears, press <1> to create a RAID driver disk.

7. Insert a formatted floppy disk into the USB floppy disk drive, then press <Enter>.

8. Follow the succeeding screen instructions to complete the process.

Summary of Contents for MAXIMUS VI HERO























































































































































































Search results

Summary of Contents for MAXIMUS VI HERO

Reviews:

Related manuals for MAXIMUS VI HERO

Brands by name

Popular brands

Asus MAXIMUS VI HERO, Manual

Search results

Summary of Contents for MAXIMUS VI HERO

Reviews:

Related manuals for MAXIMUS VI HERO

Brands by name

Popular brands