Asus MAXIMUS VI HERO Manual Download Page 127

Page: 127 / 182

ASUS MAXIMUS VI HERO

3-49

Chapter 3

Add your CMOS Profile

Label

Allows you to input the label of the setup profiles.

Save to Profile

Allows you to save the current BIOS settings to the BIOS Flash, and create a profile.

Key in a profile number from one to eight, press <Enter>, and then select

Yes

Load CMOS Profile

Load from Profile

Allows you to load the previous BIOS settings saved in the BIOS Flash. Key in the

profile number that saved your BIOS settings, press <Enter>, and then select

Yes

•

DO NOT shut down or reset the system while updating the BIOS to prevent the

system boot failure!

•

We recommend that you update the BIOS file only coming from the same memory/

CPU configuration and BIOS version.

Load/Save CMOS Profile From/To USB drive

This item allows you to load or save CMOS profiles from or to the USB drive when clicked or

selected.

The

O.C. Profile Configuration

items show

Not Installed

if no profile is created.

3.9.3

ASUS O.C. Profile

This item allows you to store or load multiple BIOS settings.

Summary of Contents for MAXIMUS VI HERO























































































































































































Search results

Summary of Contents for MAXIMUS VI HERO

Reviews:

Related manuals for MAXIMUS VI HERO

Brands by name

Popular brands

Asus MAXIMUS VI HERO, Manual

Search results

Summary of Contents for MAXIMUS VI HERO

Reviews:

Related manuals for MAXIMUS VI HERO

Brands by name

Popular brands