Asus MAXIMUS III EXTREME User Manual Download Page 125

Page: 125 / 180

ROG Maximus III Extreme

3-41

ASUSTek O.C. Profile Utility V2.00b

Restore CMOS

Note

[Enter] Select or Load [Tab] Switch [V] Drive Info

[Up/Down/Home/End] Move [B] Backup [Esc] Exit

PATH:

A:\

BOARD:

Maximus III Extreme

VER:

0227

DATE:

07/29/2009

BOARD:

Unknown

VER:

Unknown

DATE:

Unknown

Current CMOS

•

This function supports devices such as a USB flash disk (FAT 32/16 format)
or a floppy disk with single partition only.

•

DO NOT shut down or reset the system while updating the BIOS to prevent
the system boot failure!

•

We recommend that you update the BIOS file only coming from the same
memory/CPU configuration and BIOS version.

•

Only the CMO file can be loaded.

Summary of Contents for MAXIMUS III EXTREME





















































































































































































Search results

Summary of Contents for MAXIMUS III EXTREME

Reviews:

Related manuals for MAXIMUS III EXTREME

Brands by name

Popular brands

Asus MAXIMUS III EXTREME, User Manual

Search results

Summary of Contents for MAXIMUS III EXTREME

Reviews:

Related manuals for MAXIMUS III EXTREME

Brands by name

Popular brands