Asus M4N98TD EVO User Manual Download Page 77

Page: 77 / 118

ASUS M4N98TD EVO

3-21

Chapter 3

3.6.5

USB Configuration

The items in this menu allows you to change the USB-related features. Select an item then

press <Enter> to display the configuration options.

The

USB Devices Enabled

item shows the auto-detected values. If no USB device is

detected, the item shows None.

USB Functions [Enabled]

[Enabled]

Enables the USB Host Controllers.

[Disabled]

Disables the controllers.

The following items appear only when you set

USB Functions

to [Enabled].

USB 2.0 Controller [Enabled]

[Enabled]

Enables the USB 2.0 controller.

[Disabled]

Disables the controller.

Legacy USB Support [Enabled]

[Disabled]

Disables the function.

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

3.6.4

PCIPnP

The PCI PnP menu items allow you to change the advanced settings for PCI/PnP devices.

Plug And Play O/S [No]

[Yes]

When set to [Yes] and if you install a Plug and Play operating system, the

operating system configures the Plug and Play devices not required for boot.

[No]

When set to [No], BIOS configures all the devices in the system.

Advanced PCI/PnP Settings
WARNING: Setting wrong values in below sections

may cause system to malfunction.

Plug And Play O/S

[No]

BIOS SETUP UTILITY

Advanced

USB Configuration

Module Version - 2.24.3-13.4

USB Devices Enabled:

None

USB Functions

[Enabled]

USB 2.0 Controller

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller Mode

[HiSpeed]

BIOS SETUP UTILITY

Advanced

Enabled

Disabled

Options

Summary of Contents for M4N98TD EVO























































































































Search results

Summary of Contents for M4N98TD EVO

Reviews:

Related manuals for M4N98TD EVO

Brands by name

Popular brands

Asus M4N98TD EVO, User Manual

Search results

Summary of Contents for M4N98TD EVO

Reviews:

Related manuals for M4N98TD EVO

Brands by name

Popular brands