Asus M4N98TD EVO User Manual Download Page 108

Page: 108 / 118

4-18

Chapter 4: Software support

Chapter 4

4.5.3

Installing the RAID driver during Windows

OS installation

To install the RAID driver for Windows

1. During the OS installation, the system prompts you to press the F6 key to install

third-party SCSI or RAID driver.

2. Press <F6>, and then insert the floppy disk with RAID driver into the USB floppy disk drive.

When prompted to select the SCSI adapter to install, select the RAID driver for the

corresponding OS version.

4. Follow the succeeding screen instructions to complete the installation.

To install the RAID driver for Windows

Vista or later OS

During the OS installation, click L

oad Driver

to allow you to select the installation

media containing the RAID driver.

2. Insert the USB flash drive with RAID driver into the USB port or the support DVD into

the optical drive, and then click

Browse

3. Click the name of the device you’ve inserted, go to

Drivers

RAID

, and then select

the RAID driver for the corresponding OS version. Click

4. Follow the succeeding screen instructions to complete the installation.

Before loading the RAID driver from a USB flash drive, you have to use another computer

to copy the RAID driver from the support DVD to the USB flash drive.

4.5.4

Using a USB floppy disk drive

Due to OS limitation, Windows

XP may not recognize the USB floppy disk drive when you

install the RAID driver from a floppy disk during the OS installation.
To solve this issue, add the USB floppy disk drive’s Vendor ID (VID) and Product ID (PID) to

the floppy disk containing the RAID driver. Refer to the steps below:

Using another computer, plug the USB floppy disk drive, and insert the floppy disk

containing the RAID driver.

Right-click

My Computer

on the

Windows

desktop or

start

menu,

and then select

Manage

from the

pop-up window.

Summary of Contents for M4N98TD EVO























































































































Search results

Summary of Contents for M4N98TD EVO

Reviews:

Related manuals for M4N98TD EVO

Brands by name

Popular brands

Asus M4N98TD EVO, User Manual

Search results

Summary of Contents for M4N98TD EVO

Reviews:

Related manuals for M4N98TD EVO

Brands by name

Popular brands