Asus M4N82 Deluxe User Manual Download Page 121

Page: 121 / 128

ASUS M4N82 Deluxe

5-1

Chapter 5:

ATI

CrossFireX™ technology support

Chapter 5

5.1

NVIDIA

SLI™ technology

The motherboard supports the NVIDIA

SLI™ (Scalable Link Interface) technology that

allows you to install multi-graphics processing units (GPU) graphics cards. Follow the

installation procedures in this section.

5.1.1

Requirements

•

In Dual SLI mode, you should have two identical SLI-ready graphics cards that are

NVIDIA

certified.

•

In Triple SLI mode, you should have three identical SLI-ready graphics cards that are

NVIDIA

certified.

•

Ensure that your graphics card driver supports the NVIDIA SLI technology. Download

the latest driver from the NVIDIA website (www.nvidia.com).

•

Ensure that your power supply unit (PSU) can provide at least the minimum power

required by your system. See page 2-34 for details.

•

We recommend that you install additional chassis fans for better thermal environment.

•

The NVIDIA 3-Way SLI technology is supported by Windows

Vista™ operating

system only.

•

Visit the NVIDIA zone website (http://www.nzone.com) for the latest certified graphics

card and supported 3D application list.

Summary of Contents for M4N82 Deluxe

































































































































Search results

Summary of Contents for M4N82 Deluxe

Reviews:

Asus M4N82 Deluxe, User Manual, Page: 121 / 128

Search results

Summary of Contents for M4N82 Deluxe

Reviews: