Asus M4A88TD-M/USB3 User Manual Download Page 83

Page: 83 / 124

ASUS M4A88TD-M/USB3

3-27

Chapter 3

3.6.5

USB Configuration

The items in this menu allow you to change the USB-related features. Select an item and

press <Enter> to display the configuration options.

The

USB Devices Enabled

item shows the auto-detected values. If no USB device is

detected, the item shows

None

USB Functions [Enabled]

[Enabled]

Enables the USB Host Controllers.

[Disabled]

Disables the controllers.

The following items appear only when you set

USB Support

to [Enabled].

Legacy USB Support [Auto]

[Auto]

Allows the system to detect the presence of USB devices at startup. If

detected, the USB controller legacy mode is enabled. If no USB device is

detected, the legacy USB support is disabled.

[Enabled]

Enables the support for USB devices on legacy operating systems (OS).

[Disabled]

Disables the function.

USB 2.0 Controller Mode [HiSpeed]

[FullSpeed]

Sets the USB 2.0 controller mode to FullSpeed (12 Mbps).

[HiSpeed]

Sets the USB 2.0 controller mode to HiSpeed (480 Mbps).

USB Configuration

Module Version - 2.24.5-13.4

USB Devices Enabled:

None

USB Functions

[Enabled]

Legacy USB Support

[Auto]

USB 2.0 Controller Mode

[HiSpeed]

M4A88TD-M/USB3 BIOS Setup

Advanced

Options

Disabled

Enabled

Version 0205

The following items only appear when a USB storage device is plugged in.

USB Mass Storage Device Configuration

USB Mass Storage Reset Delay [20 Sec]

Device #1

Kingston DataTraveler

Emulation Type

[Auto]

M4A88TD-M/USB3 BIOS Setup

Advanced

Number of seconds

POST waits for the

USB mass storage

device after start

unit command.

Version 0205

Summary of Contents for M4A88TD-M/USB3





























































































































Search results

Summary of Contents for M4A88TD-M/USB3

Reviews:

Related manuals for M4A88TD-M/USB3

Brands by name

Popular brands

Asus M4A88TD-M/USB3, User Manual

Search results

Summary of Contents for M4A88TD-M/USB3

Reviews:

Related manuals for M4A88TD-M/USB3

Brands by name

Popular brands