2-20
Chapter 2: BIOS information
ACPI SRAT Table [Enabled]
Enables or disables the building of ACPI SRAT table. Configuration options: [Enabled]
[Disabled]
C1E Support [Enabled]
Enables or disables the CPU Enhanced Halt (C1E) function, a CPU power-saving function
in system halt state. When this item is enabled, the CPU core frequency and voltage will be
reduced during the system halt state to decrease power consumption.
Configuration options: [Disabled] [Enabled]
ASUS Core Unlocker [Disabled]
Enables the ASUS Core Unlocker to get the full computing power of the processor. Select
[Disabled] to disable this function. Configuration options: [Enabled] [Disabled]
CPU Core Activation [Auto]
Allows you to set the active CPU cores. Configuration options: [Auto] [Manual]
The following items appear only when you set
CPU Core Activation
to
[Manual]
.
2nd Core [On]
Enables or disables the second CPU core. Configuration options: [On] [Off]
3rd Core [On]
Enables or disables the third CPU core. Configuration options: [On] [Off]
4th Core [On]
Enables or disables the fourth CPU core. Configuration options: [On] [Off]
2.5.2
Chipset
NorthBridge Configuration
DRAM Controller Configuration
Bank Interleaving [Auto]
Allows you to enable the bank memory interleaving. Configuration options: [Disabled]
[Auto]
Channel Interleaving [Auto]
Allows you to enable the channel memory interleaving.
Configuration options: [Disabled] [Address bits 6] [Address bits 12] [Auto]
[XOR of Address bits [20:16, 6]] [XOR of Address bits [20:16, 9]]
Enable Clock to All DIMMs [Disabled]
Enables unused Clocks to DIMMs even though memory slots are not populated.
Configuraiton options: [Enabled] [Disabled]
MemClk Tristate C3/ATLVID [Disabled]
Allows you to enable or disable MemClk Tri-Stating during C3 and Alt VID.
Configuration options: [Disabled] [Enabled]
