4.
AMD
®
SB710 Serial ATA 3.0 Gb/s connectors (7-pin SATA 1/2/3/5/6)
These connectors are for the Serial ATA 3.0 Gb/s signal cables for Serial ATA hard
disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can
create a RAID 0, RAID 1, or RAID 10 configuration through the onboard AMD
®
SB710
controller.
• These connectors are set to
IDE
mode by default. In
IDE
mode, you can connect Serial
ATA boot/data hard disk drives to these connectors. If you intend to create a Serial ATA
RAID set using these connectors, set the type of the SATA connectors in the BIOS to
[RAID]
. See section
2.3.4 SATA Configuration
for details.
• You must install Windows
®
XP Service Pack 2 or later version before using Serial
ATA hard disk drives. The Serial ATA RAID feature is available only if you are using
Windows
®
XP SP2 or later version.
• When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to
[AHCI]
. See section
2.3.4 SATA Configuration
for details.
SATA6
GND
RSATA_TXP6
RSATA_TXN
6
GND
RSATA_RXP6
RSATA_RXN
6
GND
SATA5
GND
RSATA_TXP5
RSATA_TXN
5
GND
RSATA_RXP5
RSATA_RXN
5
GND
SATA1
GND
RSATA_RXN
1
RSATA_RXP1
GND
RSATA_TXN
1
RSATA_TXP1
GND
SATA2
GND
RSATA_RXN
2
RSATA_RXP2
GND
RSATA_TXN
2
RSATA_TXP2
GND
SATA3
GND
RSATA_RXN
3
RSATA_RXP3
GND
RSATA_TXN
3
RSATA_TXP3
GND
M4A88T-V EVO/USB3
M4A88T-V EVO/USB3 SATA connectors
ASUS M4A88T-V EVO Series
1-27
