background image

ASUS M4A88T-M LE 

2-3

•  This function supports USB flash disks with 

FAT 32/16

 format and single partition only.

•  DO NOT shut down or reset the system while updating the BIOS to prevent system boot 

failure!

2.1.3 

ASUS CrashFree BIOS 3

The ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file 

when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS 

file using the motherboard support DVD or a removable device that contains the updated 

BIOS file.

•  Before using this utility, rename the BIOS file in the removable device into 

 

M4A88TML.ROM

.

•  The BIOS file in the support DVD may not be the latest version. Download the latest 

BIOS file from the ASUS website at 

www.asus.com.

•  The removable devices that ASUS CrashFree BIOS 3 supports vary with motherboard 

models. For motherboards without the floppy connector, prepare a USB flash disk before 

using this utility.

Recovering the BIOS

To recover the BIOS:
1. 

Turn on the system.

2. 

Insert the support DVD to the optical drive or the removable device that contains the 

BIOS file to the USB port or to the floppy disk drive, if supported.

3. 

The utility automatically checks the devices for the BIOS file. When found, the utility 

reads the BIOS file and starts flashing the corrupted BIOS file.

4. 

Turn off the system after the utility completes the updating process and turn on again.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause 

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select 

the 

Load Setup Defaults

 item under the Exit menu. Refer to section 

2.9 Exit menu

 for 

details.

Summary of Contents for M4A88T-M











































































Reviews: