Asus M4A88T-M/USB3 User Manual Download Page 36

Page: 36 / 68

Serial ATA connectors (7-pin SATA1-6)

These connectors are for the Serial ATA signal cables for Serial ATA 3Gb/s hard disk

and optical disk drives. The Serial ATA 3Gb/s is backward compatible with Serial ATA

1.5Gb/s specification. The data transfer rate of the Serial ATA 3Gb/s is faster than the

standard parallel ATA with 133 MB/s (Ultra DMA133). If you install Serial ATA hard disk

drives, you can create RAID 0, RAID 1, RAID 0+1, and JBOD configurations.

• Install the Windows

XP Service Pack 2 or later versions before using Serial ATA.

• If you intend to create a Serial ATA RAID set using these connectors, set the

SATA

Port1-Port4

and

SATA Port5-Port6

items in the BIOS to

[RAID]

. See

2.3.4 SATA

Configuration

for details.

• The motherboard does not provide a floppy disk drive connector. You could use a USB

floppy disk drive when installing Windows

XP operating system on a hard disk drive

included in a RAID/AHCI set.

• Due to Windows

XP limitation, Windows

XP may not recognize the USB floppy disk

drive.

• For more details on RAID/AHCI, refer to the RAID/AHCI Supplementary Guide included

in the folder named

Manual

in the support DVD.

SATA5

GND

RSATA_TXP5

RSATA_TXN

GND

RSATA_RXP5

RSATA_RXN

GND

SATA6

GND

RSATA_TXP6

RSATA_TXN

GND

RSATA_RXP6

RSATA_RXN

GND

SATA4

GND

RSATA_TXP4

RSATA_TXN

GND

RSATA_RXP4

RSATA_RXN

GND

SATA2

GND

RSATA_RXN

RSATA_RXP2

GND

RSATA_TXN

RSATA_TXP2

GND

SATA3

GND

RSATA_RXN

RSATA_RXP3

GND

RSATA_TXN

RSATA_TXP3

GND

SATA1

GND

RSATA_RXN

RSATA_RXP1

GND

RSATA_TXN

RSATA_TXP1

GND

M4A88T-M/USB3

M4A88T-M/USB3 SATA connectors

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.

Ensure that the audio device of Sound playback is

VIA High Definition Audio (the name

may be different based on the OS)

. Go to

Start > Control Panel > Sounds and Audio

Devices > Sound Playback

to configure the setting.

The S/PDIF module is purchased separately.

M4A88T-M/USB3

M4A88T-M/USB3 Digital audio connector

SPDIF_OUT

SPDIFOU

GND

Chapter 1: Product introduction

1-24

Summary of Contents for M4A88T-M/USB3





































































Search results

Summary of Contents for M4A88T-M/USB3

Reviews:

Related manuals for M4A88T-M/USB3

Brands by name

Popular brands

Asus M4A88T-M/USB3, User Manual

Search results

Summary of Contents for M4A88T-M/USB3

Reviews:

Related manuals for M4A88T-M/USB3

Brands by name

Popular brands