Asus M4A78LT LE User Manual Download Page 43

Page: 43 / 66

ASUS M4A78LT Series

2-3

• This function supports USB flash disks with

FAT 32/16

format and single partition only.

• DO NOT shut down or reset the system while updating the BIOS to prevent system boot

failure!

2.1.3

ASUS CrashFree BIOS 3

ASUS CrashFree BIOS 3 is an auto recovery tool that allows you to restore the BIOS file

when it fails or gets corrupted during the updating process. You can restore a corrupted BIOS

file using the motherboard support DVD or a USB flash drive that contains the BIOS file.

• Before using this utility, rename the BIOS file in the USB flash drive into

M4A78LT.ROM (for M4A78LT)

M478LTLE.ROM (for M4A78LT LE)

• Download the latest BIOS file from the ASUS website at www.asus.com.

Recovering the BIOS

To recover the BIOS:
1.

Turn on the system.

Insert the support DVD to the optical drive or the removable device that contains the

BIOS file to the USB port or to the floppy disk drive, if supported.

The utility automatically checks the devices for the BIOS file. When found, the utility

reads the BIOS file and starts flashing the corrupted BIOS file.

Turn off the system after the utility completes the updating process and turn on again.

DO NOT shut down or reset the system while updating the BIOS! Doing so can cause

system boot failure!

Ensure to load the BIOS default settings to ensure system compatibility and stability. Select

the

Load Setup Defaults

item under the Exit menu. Refer to section

2.8 Exit menu

for

details.

Summary of Contents for M4A78LT LE



































































Search results

Summary of Contents for M4A78LT LE

Reviews:

Related manuals for M4A78LT LE

Brands by name

Popular brands

Asus M4A78LT LE, User Manual

Search results

Summary of Contents for M4A78LT LE

Reviews:

Related manuals for M4A78LT LE

Brands by name

Popular brands